HobbyKing
TURNIGY 130A WATT METER AND POWER ANALYZER
| Operating voltage | 4.8~60V (0V with optional auxiliary battery) |
| Screen | 16x2, backlit LCD display |
| Size | 85x42x25mm |
| Weight | 82g |
5 Reviews
HobbyKing
TURNIGY 4.7MM BALL END REAMER
,
Turnigy 4.7mm Ball End Reamer Ultra strong steel tip, wont ...5 Reviews
HobbyKing
TURNIGY MINI-SWIFT REPLACEMENT FUSELAGE W/ MOTOR MOUNT
,
Turnigy Mini-Swift Replacement Fuselage w/ Motor Mount5 Reviews
HobbyKing
TURNIGY NANO-TECH 460MAH 3S 25~40C LIPO PACK
| Discharge Plug | Mini-JST |
| Suited to the following models | HIROBO SRB Quark SG |
: 460mAh, : 3S1P / 3 Cell / 11.1V, : 25C Constant / 40C Burst, : 45g (including wire, plug & case), : 67x30x15mm, : JST-XH,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TURNIGY ACCUCEL-8 150W 7A BALANCER/CHARGER
| Operating voltage range | 11.0~18.0Volt |
| Circuit power | max. 150W |
| Charge current range | 0.1~7.0A |
| Discharge current range | 0.1~5.0A |
| NiCd/NiMH battery cell count | 1~27 cells |
| Lithium bettery cell count | 1~8 Series |
| Pb battery voltage | 2 to 36V |
| Weight | 625g |
| Dimensions | 170X125X35mm |
| Note | Power supply not included. |
"CONNECTION BREAK" : This indicates you need to have the discharge AND balance plugs connected. This unit charges through the discharge wires and balances through the balance wires. Connect all wires or you will get a "CONNECTION BREAK" message.,
The Accucel-8150 is a Lipoly/LiFe battery charging workhorse. Capable of ...5 Reviews
HobbyKing
TURNIGY 5MM LONG SHAFT FLAT HEAD SCREWDRIVER
,
Turnigy 5mm long shaft Flat Head Screwdriver Ultra strong steel ...5 Reviews
HobbyKing
TURNIGY 2650MAH 3S 30C LIPO PACK
| Minimum Capacity | 2650mAh |
| Constant Discharge | 30C |
| Peak Discharge (10sec) | 40C |
| Pack Weight | 247g |
| Pack Size | 140 x 44 x 19mm |
| Charge Plug | JST-XH |
Configuration:, 3S1P / 11.1v / 3Cell, Discharge Plug:, 4mm Bullet-connector,
The new number one in performance and price! The new ...5 Reviews
HobbyKing
TURNIGY 1600MAH 2S 30C LIPO PACK
| Minimum Capacity | 1600mAh |
| Configuration | 2S1P / 7.4v / 2Cell |
| Constant Discharge | 30C |
| Peak Discharge (10sec) | 40C |
| Pack Weight | 102g |
| Pack Size | 105 x 35 x 14mm |
| Charge Plug | JST-XH |
| Discharge plug | XT60 |
5 Reviews
HobbyKing
TURNIGY S3317M SERVO 26G / 3.0KG / .14SEC
: 26g, : 42 x 28 x 15mm, : 3.0kg-cm, : .14sec, : Metal,
Turnigy S3317M Servo 26g / 3.0kg Weight Dimensions Torque Speed ...5 Reviews
HobbyKing
TURNIGY BALL END DRIVER FOR R/C HELICOPTERS
,
Turnigy Ball End Driver for R/C Helicopters Lightweight, hollow alloy ...5 Reviews
HobbyKing
TURNIGY 30CC GAS ENGINE W/ CDI
| Displacement | 30cc |
| Weight | 939g (w/ spark plug) |
| Carburettor | (Walbro) Diaphragm & Butterfly valve. |
| Prop Speed | 1600 ~ 12000rpm |
| Max power | 2.7hp/1.98kw |
| Suggested prop | 16x8, 17x8, 17x10 |
| Ignition | DC-CD (6v only) |
| Bore/Stroke | 34x28mm |
| Size | 130mm high / 120mm wide* |
| Mount hole | 64mm x 64mm |
Mixture: 25:1 to 40:1,
Turnigy 30cc Gas Engine Unique and quality features which make ...5 Reviews
HobbyKing
TURNIGY 1600MAH 4S 20C LIPO PACK
| Minimum Capacity | 1600mAh |
| Constant Discharge | 20C |
| Peak Discharge (10sec) | 30C |
| Pack Weight | 179g |
| Pack Size | 89 x 31 x 29mm |
| Charge Plug | JST-XH |
| Discharge Plug | XT60 |
Configuration:, 4S1P / 14.8v / 4Cell,
The new number one in performance and price! The new ...5 Reviews
HobbyKing
TURNIGY K-FORCE 70A-HV OPTO V2 BRUSHLESS ESC
| BEC | NIL |
| 2 Pole | 210,000rpm |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Weight | 82g. |
| *Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
Specification:, Output:, Continuous 70A, burst 105A up to 10 seconds., Input Voltage:, 5-12 cells lithium battery or 15-36 cells NIMH battery., Control Signal Transmission:, Optically coupled system., Size:, 70mm (L) * 34mm (W) * 16mm (H)., Features:, * Now With Anti-Spark Suppressor,
The Turnigy K-Force series are based on an all new ...5 Reviews
HobbyKing
TURNIGY INFRARED THERMOMETER (-33 ~ 220CELSIUS)
| Measuring Range | -33~220C (-27.4~428F) |
| Operating Range | -10~+50C (14~+122F) |
| Full Range Accuracy | +/- 2.5C, 2.5% |
| Distance | 2~40cm |
| Emissivity Range | default 0.95 Adjustable 0.05(5E) to 1(100E) |
| Wave Length | 5um~14um |
| Power Supply | CR2032 |
Spot Range: 1:1 (1mtr distance measures 1mtr spot size),
The Turnigy temp checker now handles temp up to 428F! ...5 Reviews
HobbyKing
TURNIGY G15 BRUSHLESS OUTRUNNER 950KV
| RPM | 950kv |
| Max current | 34A |
| No load current | 10V/2.0A |
| Current capacity | 42A/15sec |
| Internal resistance | 0.03 ohm |
| Diameter of shaft | 5mm |
| Dimensions | 73x35mm |
Battery:, 3~4 Cell /11.1~14.8V, Weight:, 152g (not including connectors),
Designed to be a direct swap out for your 15 ...5 Reviews